Parsons Corporation Hiring for Junior Electrical/lighting Engineer – UAE National at Dubai Full Time

Job Summary

Parsons is looking for an amazingly talented Junior Electrical Design Engineer to join our team! In this role you will get to perform a variety of engineering duties by applying basic engineering techniques and analyses within the electrical discipline.

What You’ll Be Doing

• Carry out designs of Electrical Power distribution systems, under the guidance of senior engineer.
• Prepare Electrical HV and LV Designs, Lighting Designs for Indoor, Outdoor applications using Dialux, and AGI32 software with support from the Senior Engineer.
• Carry out electrical load analysis and short circuit calculations, and cable derating calculations using Cymcap / similar software.
• Perform load demand calculations for large private developments and/ or large Government projects.
• Design Fire alarm and Life safety systems.
• Support, with suitable guidance from Senior engineers, the preparation of detailed technical, commercial and Life Cycle Cost Analysis of various technical alternatives.
• Support in preparing the presentations for Clients.

What Required Skills You’ll Bring

• Degree in Electrical engineering from a reputable university.
• UAE Nationals Fresh Graduates are encouraged to apply.
• Minimum Internship experience in electrical lighting design of infrastructure projects.
• Shall be conversant with the IEC, IEEE as well as DEWA regulations for the electrical designs.
• Familiar with Electricity Authority regulations such as DEWA, ADDC/ ADWEA and other authorities within gulf region.
• Minimum basic knowledge in the lighting designs for indoor as well as outdoor applications, such as road lighting, tunnel lighting etc.
• Shall have basic understanding of power cable sizing calculations using software such as Amtech.
• Basic understanding of the ELV Systems such as CCTV, Access Control, Parking Management, BMS, SCADA.

What Desired Skills You’ll Bring

• Have experience of liaising with DEWA for obtaining Load NOCs, LV Design Approvals, HV Design Approvals, 11 KV Substations, etc. are advantageous.
• Knowledge/experience using Dialux, and AGI32 software are preferred.
• Aware about the requirements for the electrical system design for the Pump stations preferred.